SabersPro logo
SabersPro logo

All articles

The saber has no flash-on-clash effectUpdated 14 hours ago

If your saber is missing the flash-on-clash effect, it can be either low-charge or a setting on the saber.


To test, first charge the saber fully. Generally, low voltage from the battery will cause audio and blade effect issues. Check the specific instructions based on your core to see how to toggle this feature back. 


If you have a BASELIT core, please follow the procedure below:

Step 1: Turn on your saber (not standby mode)

Step 2: Press the power button until it flashes four times.


If this troubleshooting does not solve the problem, please email us at [email protected].

Was this article helpful?
Yes
No